Impact crusher is a commonly used Stone crusher in sand making production line and beneficiation production line. Impact crusher is equipment that mainly on the materials which crushing by the jaw crusher to fine crushing, and is indispensable crusher machine in stone production line and beneficiation production line. Because to ensure the impact crusher normal operation can effectively improve the work efficiency, but also extend the life of the machine, thereby reducing production costs. So the operation procedures and maintenance methods of impact crusher is indispensable knowledge in the course of using. Impact crusher repair method one; found impact crusher abnormal vibration:
1. maybe the material is too larger; you can check the feed size.
2. Uneven wear, indicating the impact hammer need to change.
3. Rotor imbalance, need to adjust.
4. Basis improper handing, need to check the bolts and reinforcement.
Second, if you found the impact crusher bearing fever:
1. Maybe the bearing loss of oil, need to full the oil in time;
2. bearing damage, need to change the bearing timely;
3. cover too tight, to regulate the bolt;
Third, if you found the particle size of impact crusher is too larger:
1. maybe the hammer wear, need to change the hammer;
2. the gap between the hammer and the back plate is too larger, usually adjusted to 15-20mm;
3. feed particle size is too larger will also affect the expected size.
Fourth, if now the impact crusher belt overturns:
1. indicating the belt wear replace the belt;
2. must pay more attention to the quality of belt.
User operating the impact crusher in accordance with the above method not only can effectively extend the life of crusher but also can increase the production.1. maybe the material is too larger; you can check the feed size.
2. Uneven wear, indicating the impact hammer need to change.
3. Rotor imbalance, need to adjust.
4. Basis improper handing, need to check the bolts and reinforcement.
Second, if you found the impact crusher bearing fever:
1. Maybe the bearing loss of oil, need to full the oil in time;
2. bearing damage, need to change the bearing timely;
3. cover too tight, to regulate the bolt;
Third, if you found the particle size of impact crusher is too larger:
1. maybe the hammer wear, need to change the hammer;
2. the gap between the hammer and the back plate is too larger, usually adjusted to 15-20mm;
3. feed particle size is too larger will also affect the expected size.
Fourth, if now the impact crusher belt overturns:
1. indicating the belt wear replace the belt;
2. must pay more attention to the quality of belt.
User operating the impact crusher in accordance with the above method not only can effectively extend the life of crusher but also can increase the production.
